Wafer Fabrication Operator jobs in Mobile, AL

Wafer Fabrication Operator manufactures wafers under direct supervision. Performs the basic processes of production, such as: baking, aligning, inspecting, etching, and cleaning the wafers. Being a Wafer Fabrication Operator ensures the quality of final product and provides reports to management. May require a high school diploma or its equivalent. Additionally, Wafer Fabrication Operator typically reports to a supervisor or manager. The Wafer Fabrication Operator possesses a moderate understanding of general aspects of the job. Works under the close direction of senior personnel in the functional area. May require 0-1 year of general work experience. (Copyright 2024 Salary.com)

Recently Added Wafer Fabrication Operator jobs

A
Fabrication Trades Assistant
  • Austal USA LLC
  • Mobile, AL FULL_TIME
  • Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932. Austal shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability. Austal’s commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion. REPORTS TO: Fabrication Supervisor SUPERVISES: N/A AUTHORITIES / RESPONSIBILITIES: Maintains overall safe work practices and adheres to safety policies and procedures Can maintain Safe and effective uses of craft related tools and equipment, including but not limited to: millers, sanders, grinders, burr motors, band saws, skill saws, saws all, come along and chain falls etc. Ability to insure quality of own work Ensure correct construction procedures are adhered to in compliance with Austal USA standards and project specifications Able to receive and carry out verbal and written instructions Ability to work as part of a team and within assigned roles Maintains housekeeping, keeps worksite free of rubbish, keeps materials and equipment stowed in an orderly manner Conserves waste of consumables and other material Accountable for completion of daily work assignments including the completion and signatures for work completion and quality Able to learn on-the-job as an on-the-job trainee Assists or works with other trades or Austal USA employees as directed (May be assigned tasks outside craft as required) Monitors working environment for compliance with quality, safety, environmental and health regulations and report deficiencies to supervisor Must comply with the Austal USA’s “Equal Opportunity and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be professional and free of bias, prejudice, and harassment Must comply with the Austal USA’s Employee Handbook CNC Operator Ability to learn and use needed computer software needed to operate router, FOM and cutoff saw equipment Material Handling: Load and unload router table. Place remnants in and out of racks for proper storage Keep all plate labeled to the appropriate vessel. Tracking PO number, heat or lot number, and thickness of the plate Must be willing and have the ability to learn new software programs as needed Fitter Performs shipfitting functions such as but not limited to fit up of structure, cutting, sniping, sanding, grinding, prepping, tacking and the fit up of plates under supervision Performs basic layout of plates, materials and weldments using basic engineering sketches, drawings, and diagrams with under supervision Performs basic fitting operations under supervision using standard shipfitting equipment to accomplish fabrication and ship repair duties Interprets prints and specifications Welder Performs grinding and joint preparation that meet the criteria for NDE and all visual inspection processes Performs preventative maintenance and replaces consumable components on welding equipment Performs single or multi-pass fillet welds and required blending to address stop/starts Weld in all positions with proper wraps and end terminations Performs pick-up welding Ability to correct basic weld pick-up QUALIFICATIONS / KNOWLEDGE / EXPERIENCE: Diploma/GED or comparable trade experience; comparable trade experience is defined as 5 or more years of experience working in the applicable trade, 2 years of experience in shipbuilding, or education in the trade comparable to apprenticeship Applicable Trade Technical Diploma, Certificate or equivalent preferred Welding experience is preferred Previous shipyard experience or experience in a similar industry is preferred. Ability to add, subtract, multiply, divide Ability to measure using Metric and English system Knowledge of shipyard terminology such as general ship structure and vessel layout preferred. The ability to understand directions and follow instructions; both oral and written Ability to pass applicable skills test (welder) or mechanical aptitude test (fitter or CNC operator) Must obtain and maintain applicable certifications required to perform essential functions TOOLS: PPE 12” Crescent wrench Needle nose pliers 5/32 allen wrench 4 pound mall Torpedo level Tri square Plumb bob Metric tape measure Chalk box DIRECTION EXERCISED: N/A ADDITIONAL GUIDELINES: Candidate must meet Austal USA’s basic employment eligibility guidelines. 18 years of age or older at time of application Able to provide proof of US Person Status No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date No felony convictions of Drug crimes within three years from disposition date Willing to submit to a drug screen Willing to submit to a background check LIASES WITH: Production Department Supervisors and Foremen, Health, Safety and Environmental, and trade personnel PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit. Specific physical requirements include the following: Must have the ability to bend, squat, stoop, crawl, and kneel. Perform prolonged standing. Ability to turn head from side to side and about the vertical axis. Ability to turn body at the waist from side to side and about the vertical axis. Lift/push/pull 50lbs to 75lbs on an occasional basis. Lift/push/pull up to 20lbs on a frequent basis. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps). Ability to work at heights above 12’ while working from ladders, scaffolding and/or man lifts. Able to work at a variety of levels (ex. waist, eye, overhead). Demonstrate the ability to safely and appropriately use required tools and equipment. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles. Possess sufficient handgrip and coordination to carry and operate tools and equipment. Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards. Ability to withstand cold and hot temperatures. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time. Able to respond to verbal and audible sounds/commands. Able to utilize adequate visual skills. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud, 90 dB. SAFETY Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks. As a global shipbuilder and prime defence contractor, Austal offers opportunities for individuals to contribute to the development and sustainment of some of the world’s most advanced commercial and defence ships. With major ship building facilities located in Australia, the United States of America and the Philippines - and ship sustainment and client service centres in Oman and Australia – Austal has an extensive network of operations with employment opportunities in maritime engineering, design, construction, technical services and sustainment, sales and marketing and administration. Over 5,500 Austal employees, worldwide, benefit from a corporate culture that supports a safe, modern and secure working environment, flexible working conditions, training and development opportunities, genuine career advancement opportunities and competitive salary packages - and the autonomy and responsibility to achieve individual, project and organisational goals. With our track record of success and an even brighter future, Austal is an excellent choice for anyone seeking a rewarding career in a dynamic, global industry.
  • 1 Month Ago
Apply this Job
C
Operator
  • C0500 GFL Environmental USA Inc.
  • Huxford, AL FULL_TIME
  • Safely operate and/or have the ability to operate various equipment including forklift, bobcat, backhoe, track hoe, compactor and/or steer equipment to bale, load and move waste material. Key Responsi...
  • 19 Days Ago
Apply this Job
P
Terminal Operator
  • Petroleum Fuel & Terminal Company
  • Chickasaw, AL FULL_TIME
  • Petroleum Fuel & Terminal Company is seeking Terminal Operators for its Chickasaw, Alabama Terminal location. The Terminal Operator position is responsible for performing operational activities relati...
  • 9 Days Ago
Apply this Job
S
Crematory Operator
  • SCI Shared Resources, LLC
  • Mobile, AL FULL_TIME
  • Our associates celebrate lives. We celebrate our associates. Consider the possibilities of joining a Great Place to Work! Properly receive and process human remains and ensures that the cremated remai...
  • 9 Days Ago
Apply this Job
A
​Synthesis Operator
  • Amvac Chemical Corporation
  • Axis, AL FULL_TIME
  • Job Function The Synthesis Operator is responsible for the operation, inspection, troubleshooting, and maintenance of the chemical synthesis unit for AMVAC’s Axis manufacturing plant. The synthesis op...
  • 10 Days Ago
Apply this Job
B
Machine Operator A
  • BREWTON IRON WORKS LLC
  • Brewton, AL FULL_TIME
  • Job Position: Machine Operators and Machinists Job Location: Brewton, AL Position Type: Full Time Machine shop workers typically work 40 hours per week, but they may work overtime during busy periods....
  • 10 Days Ago
Apply this Job
View All Wafer Fabrication Operator Jobs
Salary Company Skills How To Become Job Openings
Filters

Clear All
  • Filter Jobs by companies
  • More
Salary Company Skills How To Become Job Openings

0 Wafer Fabrication Operator jobs found in Mobile, AL area

J
HVAC TB Chiller Mech (un)
  • Johnson Controls International
  • Mobile, AL
  • Operations is located in Mobile, Alabama Must be able to work in Alabama, Mississippi, and Florida as needed. Be part of...
  • 4/19/2024 12:00:00 AM
Apply this job
A
Manufacturing Engineer (aerospace)
  • ALTEN Technology USA
  • Mobile, AL
  • We’re ALTEN Technology USA, an engineering company that provides solutions for engineering, technology, and product deve...
  • 4/18/2024 12:00:00 AM
Apply this job
H
Production Operator II M4
  • Hiring Now!
  • Mobile, AL
  • Production Operator II M4 Date: Apr 10, 2024 Location: Mobile, AL, US, 36619 #job-location.job-location-inline display: ...
  • 4/18/2024 12:00:00 AM
Apply this job
H
Manufacturing (Refrigeration) Engineer
  • Hiring Now!
  • Mobile, AL
  • Our client is in need of a Manufacturing Engineer for their manufacturing facility near the Birmingham, AL area.Responsi...
  • 4/17/2024 12:00:00 AM
Apply this job
A
Plant Quality Manager
  • Anchor Quest
  • Mobile, AL
  • Our client is a well established reputable manufacturing company within the Building Products arena looking to add some ...
  • 4/17/2024 12:00:00 AM
Apply this job
J
Sprinkler Inspector V
  • Johnson Controls International
  • Mobile, AL
  • JCI is OFFERING HIRING INCENTIVES OR RELOCATION for various FIRE SPRINKLER SERVICE POSITIONS. SIGN ON BONUS AVAILABLE **...
  • 4/17/2024 12:00:00 AM
Apply this job
C
Production Manager
  • CarMax
  • Mobile, AL
  • General Summary: The Service Operations Support Manager in Training (Production Manager) is accountable for performing t...
  • 4/15/2024 12:00:00 AM
Apply this job
B
Restaurant Manager
  • BJ's Restaurants
  • Mobile, AL
  • Overview: Do you challenge yourself to always do things right and do them better? Then you will thrive at BJ’s Restauran...
  • 12/11/2023 12:00:00 AM
Apply this job
View All Wafer Fabrication Operator Jobs

About Mobile, Alabama

Mobile (/moʊˈbiːl/ moh-BEEL; French pronunciation: ​[mɔ.bil]) is the county seat of Mobile County, Alabama, United States. The population within the city limits was 195,111 as of the 2010 United States Census, making it the third most populous city in Alabama, the most populous in Mobile County, and the largest municipality on the Gulf Coast between New Orleans, Louisiana, and St. Petersburg, Florida. Alabama's only saltwater port, Mobile is located on the Mobile River at the head of the Mobile Bay and the north-central Gulf Coast. The Port of Mobile has always played a key role in the economi...
Source: Wikipedia (as of 04/11/2019). Read more from Wikipedia
Income Estimation for Wafer Fabrication Operator jobs
$25,871 to $39,263
Mobile, Alabama area prices
were up 1.3% from a year ago
View detail

What does a Wafer Fabrication Operator do?

Wafer Fabrication Operator in Rapid City, SD
Wafer fabrication operators run silicon chip-making machinery.
January 28, 2020