Mechanical Engineering Technician jobs in Virginia

Mechanical Engineering Technician assists mechanical engineers in the planning and testing of mechanical components, equipment, and machinery, such as engines, instruments, controls, robots, machines, etc. Helps prepare proposals and cost estimates. Estimates work load to establish completion dates. Being a Mechanical Engineering Technician requires a high school diploma or its equivalent. Typically reports to a supervisor or manager. The Mechanical Engineering Technician may require 0-1 year of general work experience. Possesses a moderate understanding of general aspects of the job. Works under the close direction of senior personnel in the functional area. (Copyright 2024 Salary.com)

L
Mechanical Engineering Technician IV (Steering Systems, Hydraulics)
  • Life Cycle Engineering
  • Norfolk, VA FULL_TIME
  • Mechanical Engineering Technician IV (Steering Systems, Hydraulics)

    Position Summary:
    Life Cycle Engineering is seeking an experienced Engineering Tech IV (Steering Systems, Hydraulics) to join the LCE team in Norfolk, VA.

    Clearance Requirement:
    • Must be a US citizen with the ability to obtain/maintain a DoD Secret security clearance.
    Essential Functions and Responsibilities:
    • Provide assessment status and operational checks of equipment and systems which include:
    • Identify and document system and/or equipment problems
    • Correct and/or repair identified discrepancies and required corrective actions
    • Identify and document design problems
    • Identify and document logistic support deficiencies and recommend corrective actions
    • Develop and provide on-the job training (OJT) to Ships Force personnel
    • Verify configuration data and existing 2 Kilos for accuracy
    • Develop test specifications.
    • Provide engineering/technical assistance, evaluations, assessments, grooms, tests, inspections, operational checks and training in support of HM&E and peripheral systems (primarily HM&E mechanical systems such as Steering Systems, Anchor Windlass, Fin Stabilizer Systems, Torpedo Strike down Lift Systems, Controllable Pitch Propeller Systems and Bow Thrusters Systems)
    • Troubleshoot, restore, and replace faulty or defective components in HM&E systems, equipment, and related peripheral systems. Includes testing, alignment, and restoration to normal operation.
    • Conduct fault analysis and the assembly and disassembly of units and subsystems.
    • Evaluate, assess, and provide maintenance training to Ship's Force.
    • Provide input for Technical Assistance Visit Reports (TAVRs) IAW the JFMM requirements for each on board tech assist.
    • Provide Total Ship Readiness Assessment (TSRA), operational, and maintenance assessment support and over-the-shoulder training to Ship's Force on HM&E systems, equipment, and related peripheral systems.
    Required Education, Skills, and Experience:
    • High School Diploma
    • Three (3) years full time specialized engineering experience in operation, maintenance, installation, test and/or repair of surface ship hydraulic systems (such as Steering Systems, Anchor Windlass, Fin Stabilizer Systems, Torpedo Strike down Lift Systems, Controllable Pitch Propeller Systems and Bow Thrusters Systems)
    • Five (5) years full-time technical experience in design, installation, test, and/or repair of mechanical systems/equipment.
    • Experience in evaluating material condition of ship systems and implementation of corrective action.
    Physical Demands & Expectations:
    • Regular physical activity to include walking, climbing stairs, bending, stooping, reaching, lifting (up to 75 pounds), and standing; occasional prolonged sitting
    • Ability to speak, read, hear and write, with or without assistance
    • Ability to use phone and computer systems, copier, fax and other office equipment
    This position description represents a summary of the major components and requirements of the outlined job. Other duties and responsibilities may be assigned or required as business needs dictate. Questions regarding this description should immediately be addressed to the department manager or to Human Resources.

    LIFE CYCLE ENGINEERING
    Life Cycle Engineering (LCE) is a privately held, employee-owned company with an emphasis on "doing the right thing the right way", which applies to the way we treat our customers and employees. We are proud to have been recognized as a "Best Place to Work" for 17 years running! Learn more below and at .
    Mission
    Our mission is to enable people and organizations to achieve their full potential.
    As a professional services organization, our mission is focused on our clients' people and organizations. It is our company's cornerstone belief that we will not lead the industry in assisting our clients unless we excel at helping our own people and teams reach their full potential.

    Culture
    Our corporate culture encourages personal and professional growth because LCE's success depends on the talent, innovation, professionalism, and commitment of its employees. LCE is a strengths-based organization focused on turning individual talents into strengths and then turning individual strengths into organizational performance that supports our clients' success.

    Benefits
    • Affordable Medical/Dental/Vision Plans for employees and their families
    • Free Employee Life and Disability Insurance, with supplemental coverage options available
    • Health Savings Account and Flexible Savings Account options
    • Company matched 401(k) & company-funded Employee Stock Ownership Program (ESOP)
    • Paid Vacation, Holiday, Sick Leave
    • Continuing Education and Professional Development programs at all levels
    • Flexible Schedules and Relaxed Dress Code
    • Employer-sponsored events, social collaboration, and open communication
    • Free access to an extensive online training library, including certification prep
    • Bonus Program for outstanding contributions, Employee Referral Program, numerous Recognition Opportunities, and more...
    *Benefits may vary by business unit and location. http://www.lce.com/Employee_Benefits_358.html

    Life Cycle Engineering (LCE) shall abide by the requirements of 41 CFR * 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that LCE take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, because of or on the basis of pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation, and any other status protected by applicable state law. In addition, LCE will not discharge or in any other manner discriminate against any employee or applicant for employment because such employee or applicant has inquired about, discussed, or disclosed the compensation of the employee or applicant or another employee or applicant. LCE shall also abide by the requirements of 29 CFR Part 471, Appendix A.

    Life Cycle Engineering (LCE) shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a).  These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin.  Moreover, these regulations require that LCE take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability.  In addition, LCE will not discharge or in any other manner discriminate against any employee or applicant for employment because such employee or applicant has inquired about, discussed, or disclosed the compensation of the employee or applicant or another employee or applicant.  LCE shall also abide by the requirements of 29 CFR Part 471, Appendix A.

     

  • 1 Month Ago

W
Mechanical Technician Machining Job Shop
  • West Engineering Company, Inc.
  • Ashland, VA FULL_TIME
  • Job description: Entry level in machining job shop for mechanical technician who is smart enough to be a mechanical engineer, is skillful with engineering drawings and has a passion for using tooling ...
  • 5 Days Ago

O
Mechanical Engineering Technician III
  • Orbis, Inc.
  • Norfolk, VA FULL_TIME
  • Mechanical Engineering Technician III Norfolk, VA Responsibilities: Provide Field Representative support service inspections, troubleshooting, fault isolation, and expert consultation, repair, and ins...
  • 15 Days Ago

C
Mechanical Engineering Technician or Associate
  • Commonwealth of VA Careers
  • Charlottesville, VA FULL_TIME
  • The University of Virginia is accepting applications for a Mechanical Engineering Technician or Mechanical Engineering Associate to join the Design Services team within Facilities Management. The succ...
  • Just Posted

C
Mechanical Engineering Technician
  • Chenega MIOS
  • Quantico, VA FULL_TIME
  • Overview The Mechanical Engineering Technician assists NAVFAC field offices with performance of mechanical engineering statement of work development. Responsibilities Function as a team member on assi...
  • 3 Days Ago

A
Mechanical Technician Engineering IV
  • Alutiiq
  • Wallops Island, VA FULL_TIME
  • Taxable Entity MCCALLIE ASSOCIATES INC Job Title Mechanical Technician Engineering IV Location VA Wallops Island NASA Goddard - Wallops Island, VA 23337 US (Primary) Category Installation Maintenance ...
  • 4 Days Ago

C
Mechanical Engineering Technician
  • Comtec Consultants
  • Reedsville, PA
  • Title: Mechanical Engineer Duration: 12 Months Location: Reedsville, PA 17084 Job Description: As a Development Engineer...
  • 4/19/2024 12:00:00 AM

G
3rd Shift Mechanical Engineering Technician
  • Global Channel Management, Inc.
  • Pompano Beach, FL
  • Job Description: Mechanical Engineering Technician needs 2 to 3+ years in a manufacturing or industrial environment, wit...
  • 4/19/2024 12:00:00 AM

G
3rd Shift Mechanical Engineering Technician
  • Global Channel Management, Inc
  • Pompano Beach, FL
  • Mechanical Engineering Technician needs 2 to 3+ years in a manufacturing or industrial environment, with experience in e...
  • 4/19/2024 12:00:00 AM

C
SR Mechanical Engineering Technician
  • Careerbuilder-US
  • White River, VT
  • POSITION SUMMARY: Work with a team of world-class experts in turbomachinery and highly capable support staff on a variet...
  • 4/18/2024 12:00:00 AM

U
Senior Mechanical Engineering Technician
  • US Tech Solutions
  • Canaan, CT
  • Duration-12 months+ Employment Type: W-2 Job Description: This role will master the Production Technology and Maintenanc...
  • 4/17/2024 12:00:00 AM

G
3rd Shift Mechanical Engineering Technician
  • Global Channel Management Inc.
  • Pompano Beach, FL
  • About the job 3rd Shift Mechanical Engineering Technician Mechanical Engineering Technician needs 2 to 3+ years in a man...
  • 4/17/2024 12:00:00 AM

G
Mechanical Engineering Technician III
  • Generac Power Systems
  • Waukesha, WI
  • Company Generac Power Systems Name Mechanical Engineering Technician III Req # 63669 Employment Type Full Time Shift 1st...
  • 4/16/2024 12:00:00 AM

L
Mechanical Engineering Technician III (Draftsman 3)
  • LG-TEK
  • Fort George G Meade, MD
  • Overview: Prepare and revise engineering drawings, schematics, logic diagrams and block diagrams. Responsibilities: Comp...
  • 4/15/2024 12:00:00 AM

Virginia (/vərˈdʒɪniə/ (listen)), officially the Commonwealth of Virginia, is a state in the Southeastern and Mid-Atlantic regions of the United States located between the Atlantic Coast and the Appalachian Mountains. Virginia is nicknamed the "Old Dominion" due to its status as the first English colonial possession established in mainland North America and "Mother of Presidents" because eight U.S. presidents were born there, more than any other state. The geography and climate of the Commonwealth are shaped by the Blue Ridge Mountains and the Chesapeake Bay, which provide habitat for much of ...
Source: Wikipedia (as of 04/11/2019). Read more from Wikipedia
Income Estimation for Mechanical Engineering Technician jobs
$42,066 to $61,885

Mechanical Engineering Technician in Houston, TX
Your duties may include assisting mechanical engineers with several different tasks such as designing, development, testing, and manufacturing mechanical devices.
January 27, 2020
Mechanical Engineering Technician in Monterey, CA
You help Mechanical Engineers design, test, maintain, and repair mechanical systems on anything from the dishwasher in the kitchen to the airplane that transports people all over the world.
February 08, 2020
Mechanical Engineering Technician in Poughkeepsie, NY
Mechanical engineering technicians design, install and repair industrial plant machinery and parts.
December 20, 2019