Aerospace Engineer jobs in Jackson, MS

Not a Rotational position....must be a US Citizen!

The incumbent is responsible for servicing, troubleshooting, repairing, and inspecting aircraft to ensure airworthiness. Oversees and directs the activities of the Aircraft Mechanics.

ESSENTIAL FUNCTIONS

THE ESSENTIAL FUNCTIONS INCLUDE BUT ARE NOT LIMITED TO, THE FOLLOWING DUTIES. ADDITIONAL ESSENTIAL FUNCTIONS MAY BE IDENTIFIED BY THE ORGANIZATION AND LISTED AS SUCH IN THE INCUMBENT'S PERFORMANCE APPRAISAL ELEMENTS. VARIOUS TASKS MAY BE ASSIGNED UNDER EACH ESSENTIAL FUNCTION. THOSE THAT ARE LISTED UNDER THE EXAMPLES OF WORK ARE NOT ALL-INCLUSIVE; THEY ARE EXAMPLES ONLY AND MAY BE AMENDED OR ADDED TO AS NEEDED BY THE ORGANIZATION.

1. Maintenance of Aircraft
2. Maintenance of Ground Support Equipment (GSE)
3. Supervision and Administration

EXAMPLES OF WORK

EXAMPLES OF WORK PERFORMED IN THIS CLASSIFICATION INCLUDE BUT ARE NOT LIMITED TO, THE FOLLOWING TASKS. THESE TASKS MAY BE AMENDED OR OTHER TASKS MAY BE ASSIGNED AS NECESSARY.

• Inspects and certifies aircraft at specific intervals as required by OEM and FAA.
• Troubleshoots system malfunctions, and performs necessary corrective actions.
• Document's maintenance of aircraft on appropriate forms.
• Removes and replaces defective components.
• Complies with Service Bulletins, Instructions, and Airworthiness Directives as directed.

• Performs maintenance on Ground Support equipment.

• Performs preflight/post-flight turnaround inspections and servicing when required.
• Maintains aircraft logbooks and historical data as required.
• Complies with safety, foreign object damage, and tool control program requirements.
• Washes, waxes, cleans and maintains the exterior and interior of aircraft.
• Serves as a point of contact with the Quality Assurance Representative.
• Advises management of problems that may delay scheduled delivery of aircraft to customers.
• Ensures materials issued for assigned tasks are the correct items to repair the problem.
• Provides on-the-job training to new employees as required.
• Supervises and inspects maintenance performed by FAA-certified and non-certified personnel.
• Services oxygen, nitrogen, tires, oil, and hydraulic systems.

• Performs Corrosion Control checks when required.
• Assists with monitoring maintenance of aircraft fleet.
• Provides technical support to the customer concerning the fleet.
• Assign mechanics to specific aircraft daily.
• Communicates with customers regarding aircraft status.
• Guides subordinate employees and peers when appropriate, collaborating and cooperating with other members of the management team.
• Implements the performance appraisal system for employees under the incumbent's supervision.
• Approves or disapproves subordinate employees' performance and recommends action of corrective procedures.
• Implements in-service training programs to communicate current information and procedures to employees under the incumbent's supervision and evaluates training programs to determine their effectiveness in improving staff performance.
• Recommends and maintains uniform procedures and standards of operation for the Department.
• Evaluate the efficiency of operations within the Department and recommend appropriate changes.
• Assists with recruitment, selection, discipline, and training of personnel.

• Greets visitors.

• Exhibits positive courteous behavior with customers businesses and coworkers.

• Assists coworkers and those in other departments to successfully perform job tasks and functions when necessary.

• Follows all safety procedures and practices as established by the Company and regulatory bodies.
• This job does have supervisory responsibilities.

INCUMBENT PERFORMS OTHER JOB-RELATED TASKS AS ASSIGNED AND REQUIRED; ANY DUTIES/TASKS INCLUDED IN THE EMPLOYEE'S PERFORMANCE EVALUATION ELEMENTS ARE ESSENTIAL TO THAT EMPLOYEE'S POSITION WITHIN THE JOB CLASSIFICATION.

MINIMUM QUALIFICATIONS

The following minimum qualifications have been identified by subject matter experts (SME) who have supervised this position or functioned in the position; they are based on job analysis information supplied by these SMEs. However, if a candidate believes he/she is qualified for the job although he/she does not have the minimum qualifications set forth below, he/she may request special consideration through substitution of related education and experience, demonstrating the ability to perform the essential functions of the position. Any request to substitute related education or experience for minimum qualifications must be addressed to the Director of Human Resources in writing, identifying the related education and experience that demonstrates the candidate's ability to perform all essential functions of the position. If a candidate believes he/she needs a reasonable accommodation to meet these minimum qualifications or, if called for an interview, to attend such an interview, the candidate must notify the Director of Human Resources in writing of the need for the accommodation and identify the specific accommodation requested.

EDUCATION and/or EXPERIENCE:

Graduation from a standard four (4) year high school or equivalent (GED) AND seven (7) years of experience in work directly related to aircraft maintenance of which two to three years must have been directly related to King Air 200/300/350 maintenance and at least two years in a lead role making airworthiness decisions.

CERTIFICATES, LICENSES, REGISTRATIONS and EQUIPMENT:

A & P License

Sufficient aviation maintenance hand tools to perform routine Airframe and Powerplant duties.

Valid State driver's license

Current Passport with at least six months remaining.

KNOWLEDGE, SKILLS, ABILITIES, AND OTHER CHARACTERISTICS:

The following skills and abilities are required:

understanding and using the English language both oral and written to communicate information or ideas to another person or persons;

• writing routine reports and correspondence;
• reading and interpreting documents such as safety rules, operating and maintenance instructions, and procedure manuals;
• adding, subtracting, multiplying, and dividing all units of measure, using whole numbers, common fractions, and decimals;
• interpreting a variety of instructions furnished in written, oral, diagram, or schedule form;
• planning and organizing;
• creating, entering, retrieving, and printing from current software packages such as; Excel and Word;
• demonstrating problem analysis and independent decision-making;
• demonstrating leadership; delegation of tasks and duties; motivating subordinates; discerning priorities;
• demonstrating intra and interpersonal relations;
• recognizing or identifying the existence of a problem as well as elements of a problem;
• performing a task in the presence of distracting stimulation or under monotonous conditions without significant loss of thought process and efficiency;
• perceiving and feeling such attributes of objects and materials as size, shape, temperature, or texture;
• operating hand and power tools;
• traveling worldwide with limited notice; obtain a security clearance; obtain a passport and/or visa;
• interpreting drawings, specifications, and schematics of aircraft instrument/electronic components;
• recognizing from schematics and drawing not only how one assembly functions but also how various assemblies interact with each other;

Knowledge of the following are required:

• databases sufficient to perform the job, duties, and tasks associated with the position;
• aircraft sheet metal repair and component repair;
• instrument, electronic and electrical test equipment;
• military or commercial aviation maintenance and its terminology; and
• U.S. government regulations for federal contractors and FAA maintenance programs

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand, walk, and taste or smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

WORK ENVIRONMENT:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes, or airborne particles, and the risk of electrical shock. The employee is occasionally exposed to high, precarious places; toxic or caustic chemicals; outside weather conditions; risk of radiation; and vibration. The noise level in the work environment is usually moderate.

EXAMPLES OF TITLES IN CAREER PROGRESSION

Manager, Maintenance * Supervisor, Site

Benefits include the following:

• Healthcare coverage
• Retirement plan
• Life insurance, AD&D, and disability benefits
• Wellness programs
• Paid time off, including holidays.
• Learning and Development resources
• Employee assistance resources
• Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.